Toulex Europe Logo

Toulex single use meat hangers

Toulex is a single use plastic meat support, suitable for the storage and transportation of meat parts. Toulex is a registered trade mark and has several patents.

Contact
Toulex single use meat hangers

Toulex single use meat hangers

Toulex meat hangers
were made to save.
Contact

Toulex meathangers were made to save

They save space

Toulex are the only meat hangers with fourteen pins in stead of twelve. That is 16,7% more storage and transport with ever single hanger. Check here how creative use of Toulex hangers provides you maximum efficiency.

They save plastic

Other plastic hangers: 215 grammes : 12 meat parts = 18 grammes per part.

Toulex hangers: 125 grammes : 14 meat parts = only 9 grammes per part.

They save trouble

Toulex hangers are for single use only. They are produced in a state of the art factory, with BRC/IoP accreditation. Every single hanger comes with the same guarantee of provenance, cleanliness and other quality standards.

After their single use, nothing simpler than harvesting the material they’rel made from for other purposes. We have a partnership with Ecotoul for a smooth entry into the plastic recycling industry.

They save money

They are much, much cheaper than any other plastic meat hanger. Click below for more information or for a price quote, you’ll be surprised!
Get a price quote
Toulex Europe
Toulex single use meat hangers

Toulex meathangers were made to save

They save space

Toulex are the only meat hangers with fourteen pins in stead of twelve. That is 16,7% more storage and transport with ever single hanger. Check here how creative use of Toulex hangers provides you maximum efficiency.

They save plastic

Other plastic hangers: 215 grammes : 12 meat parts = 18 grammes per part.

Toulex hangers: 125 grammes : 14 meat parts = only 9 grammes per part.

They save trouble

Toulex hangers are for single use only. They are produced in a state of the art factory, with BRC/IoP accreditation. Every single hanger comes with the same guarantee of provenance, cleanliness and other quality standards.

After their single use, nothing simpler than harvesting the material they’rel made from for other purposes. We have a partnership with Ecotoul for a smooth entry into the plastic recycling industry.

They save money

They are much, much cheaper than any other plastic meat hanger. Click below for more information or for a price quote, you’ll be surprised!
Get a price quote

Technical specifications

Toulex meat hangers come in two versions, i.e. Standard and Pro. They look identical and their weights are the same. The difference is in the raw material. Next is a chart with the technical specifications, but in short: both support a maximum load of 200 kgs, but Pro is more resilient when it comes to dynamic situations. Standard hangers are typically used for internal storage and Pro hangers for dispatch/export. We look forward to advising you on this matter.

For both Standard and Pro: The material complies with safety regulations according to EU guideline 10/2011 and its amendments. Manufacturing complies with directive EU Nr. 2023/2006. The product is traceable according to EU guideline 1935/2004. Migration tests have been performed according to EC regulation 97/48/EC. Bisphenol A, Phtalates, Nanomaterials, MOSH/MOAH and Epoxy Derivatives (EC 1895/2005) are absent in this product.

Food simulants, test conditions and results are:
• 10% ethanol, 10 days of immersion at 40 C. Result: LoQ mg/dm2
• 95% etahnol, 10 days of immersion at 40 C. Result: LoQ mg/dm2
• 3% acetic acid, 10 days of immersion at 40 C. Result: LoQ mg/dm2
• Iso-octane, 2 days of immersion at 20 C. Result: 6.2 (+/- 1.8) mg/dm

Pro Meat Hangers

Properties Method Typical value Unit
Tensile Stress at Yield (50 mm/min) ISO 527-2 21 Mpa

Tensile Strain at Yield (50 mm/min)

 ISO 527-2 6 %

Tensile Strain at Break (50 mm/min)

 ISO 527-2 >50 %

Charpy Impact Strength, notched (0 gr C)

 ISO 179/1eA 12 Kj/m2

Izod Impact Strength, notched (0 gr C)

 ISO 180/1A 9 Kj/m2

 

Standard Meat Hangers

Properties Method Typical value Unit
Tensile Stress at Yield (50 mm/min) ISO 527-2 23 Mpa

Tensile Strain at Yield (50 mm/min)

 ISO 527-2 8 %

Tensile Strain at Break (50 mm/min)

 ISO 527-2 >50 %

Charpy Impact Strength, notched (0 gr C)

 ISO 179/1eA 9 Kj/m2

Izod Impact Strength, notched (0 gr C)

 ISO 180/1A 8 Kj/m2

 

google map embed html

Contact

Toulex Europe BV
Production/warehouse

Naber Plastics B.V.
Van Hilststraat 12
NL-5145 RL Waalwijk

Office address (by appointment only)

Havenstraat 11-03
NL-7005 AG Doetinchem
info@toulex.eu

Send an e-mail
google map embed html

Contact

Toulex Europe BV
Production/warehouse

Naber Plastics B.V.
Van Hilststraat 12
NL-5145 RL Waalwijk

Office address (by appointment only)

Havenstraat 11-03
NL-7005 AG Doetinchem
info@toulex.eu

Send an e-mail